Version Differences for OPN-2006 - Opticon Technical Support Portal

# When complete the OPN2006 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN2006 from the PC. instruction manuals for the various applications are available for download in the Downloads section.

+

==Alternative Modes==

+

In addition to the CSP2 support built into the OPN2005, it is also capable of functioning as either a USB Keyboard or a USB flash drive. Both of these modes eliminate the need for PC software.

+

When in Keyboard mode, the OPN2005 can scan in real time or store data in memory which can later be transmitted at the push of a button. In flash disk(MSD) mode the OPN2005 stores barcode scans into a text file on the device. The text file can later be accessed simply by plugging in the device.

+

===USB Flash Disk Mode===

+

This mode is also referred to as USB-MSD mode. The Firmware: Storage Application must be loaded on the OPN2005 in order to enable this mode of operation. To install the Storage Application, follow these [[#Firmware_Loading|firmware loading]] instructions. Once the storage application is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.

+

Once that's finished, scanning barcodes is as simple as pressing a button. When you want to download your barcode scans, plug the OPN2005 into a computer, and copy the text file out of the flash drive. For more configuration options, see the [[#Documents|Demo manual]]. In particular, the very last page has barcodes which can be scanned to configure the layout of the text file.

+

===USB Keyboard Mode===

+

This mode allows the OPN2005 to emulate a USB Keyboard. While the OPN2005 is plugged in, any barcodes that are scanned are input wherever the cursor is on screen. When a barcode is scanned while the OPN2005 is disconnected, the barcode is stored in memory. When you want to retrieve scanned barcodes, simply plug the OPN2005 into a computer, and press any key on the device to have it play back all of the barcodes that were scanned while it was disconnected.

+

To use the OPN2005 in USB Keyboard Mode, print and scan this [http://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1 barcode sheet]. You may also need to [[##Firmware_Loading|update firmware]] to the latest version of the Firmware: OPN2001 Simulation Application to enable the feature.

+

===OPN2001 Simulation===

+

To use the OPN2005 with the OPN Companion Application, first the Firmware: OPN2001 Simulation Application must be loaded on to the OPN2005. To install the OPN2001 Simulation Application, follow these [[#Firmware_Loading|firmware loading]] instructions. You may also need to print and scan this [http://opticonfigure.opticon.com/sl/?z=kZ-1&a=4&b=0&d=1 barcode sheet].

+

===Return to Bluetooth Mode===

+

To return the OPN2005 to Bluetooth mode, you will need to load the Firmware: Bluetooth Application. To install the Firmware: Bluetooth APplication, follow these [[#Firmware_Loading|firmware loading]] instructions.

==iOS Bluetooth Troubleshooting==

This linked document walks you through the steps to connect your OPN2006 to an iOS device: [https://wiki.opticonusa.com/techsupport/en/OPN2006#Documents here]

 # When complete the OPN2006 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN2006 from the PC. instruction manuals for the various applications are available for download in the Downloads section.
 								==Alternative Modes==
 								In addition to the CSP2 support built into the OPN2005, it is also capable of functioning as either a USB Keyboard or a USB flash drive. Both of these modes eliminate the need for PC software.
 								When in Keyboard mode, the OPN2005 can scan in real time or store data in memory which can later be transmitted at the push of a button. In flash disk(MSD) mode the OPN2005 stores barcode scans into a text file on the device. The text file can later be accessed simply by plugging in the device.
 								===USB Flash Disk Mode===
 								This mode is also referred to as USB-MSD mode. The Firmware: Storage Application must be loaded on the OPN2005 in order to enable this mode of operation. To install the Storage Application, follow these [[#Firmware_Loading|firmware loading]] instructions.  Once the storage application is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.
 								Once that's finished, scanning barcodes is as simple as pressing a button. When you want to download your barcode scans, plug the OPN2005 into a computer, and copy the text file out of the flash drive. For more configuration options, see the [[#Documents|Demo manual]]. In particular, the very last page has barcodes which can be scanned to configure the layout of the text file.
 								===USB Keyboard Mode===
 								This mode allows the OPN2005 to emulate a USB Keyboard. While the OPN2005 is plugged in, any barcodes that are scanned are input wherever the cursor is on screen. When a barcode is scanned while the OPN2005 is disconnected, the barcode is stored in memory. When you want to retrieve scanned barcodes, simply plug the OPN2005 into a computer, and press any key on the device to have it play back all of the barcodes that were scanned while it was disconnected.
 								To use the OPN2005 in USB Keyboard Mode, print and scan this [http://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1 barcode sheet]. You may also need to [[##Firmware_Loading|update firmware]] to the latest version of the Firmware: OPN2001 Simulation Application to enable the feature.
 								===OPN2001 Simulation===
 								To use the OPN2005 with the OPN Companion Application, first the Firmware: OPN2001 Simulation Application must be loaded on to the OPN2005. To install the OPN2001 Simulation Application, follow these [[#Firmware_Loading|firmware loading]] instructions. You may also need to print and scan this [http://opticonfigure.opticon.com/sl/?z=kZ-1&a=4&b=0&d=1 barcode sheet].
 								===Return to Bluetooth Mode===
 								To return the OPN2005 to Bluetooth mode, you will need to load the Firmware: Bluetooth Application. To install the Firmware: Bluetooth APplication, follow these [[#Firmware_Loading|firmware loading]] instructions.
 ==iOS Bluetooth Troubleshooting==
 This linked document walks you through the steps to connect your OPN2006 to an iOS device: [https://wiki.opticonusa.com/techsupport/en/OPN2006#Documents here]