| |
# When complete the OPN-2004 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN-2004 from the PC. instruction manuals for the various applications are available for download in the Downloads section. |
|
# When complete the OPN-2004 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN-2004 from the PC. instruction manuals for the various applications are available for download in the Downloads section. |
| |
|
+ |
To factory reset the OPN-2001 please follow the below instructions.
|
| |
|
+ |
* Ensure the OPN-2001 has sufficient charge (at the least the laser should come on with a trigger press when the unit is unplugged)
|
| |
|
+ |
* Disconnect the OPN-2001 from any USB connections
|
| |
|
+ |
* Press and hold both buttons (scan and clear) for 10 seconds
|
| |
|
+ |
:At the end of the time you will hear a single tone indicating successful reset. While holding the keys the LED will flash RED (If it flashes any other color you are not holding both buttons firmly enough).
|
| |
|
+ |
:'''Note''': It is possible to disable the factory reset option of the OPN-2001 with the SDK (and subsequently our Standard PC Demo Application). If this is disabled this feature will not work until re-enabled.
|
| |
To change volume options on your OPN2004, please print and scan your desired setting from pages U124-125 in the |
|
To change volume options on your OPN2004, please print and scan your desired setting from pages U124-125 in the |
