Version Differences for OPN-2004 - Opticon Technical Support Portal

This mode allows the OPN2004 to emulate a USB Keyboard. While the OPN2004 is plugged in, any barcodes that are scanned are input wherever the cursor is on screen. When a barcode is scanned while the OPN2004 is disconnected, the barcode is stored in memory. When you want to retrieve scanned barcodes, simply plug the OPN2004 into a computer, and press any key on the device to have it play back all of the barcodes that were scanned while it was disconnected.

-

To use the OPN2004 in USB Keyboard Mode, print and scan this [http://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1 barcode sheet]. You may also need to [[#Firmware|update firmware]] to the latest version of the Firmware: OPN2001 Simulation Application to enable the feature.

+

To use the OPN2004 in USB Keyboard Mode, print and scan the barcode sheet [https://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1&type=1D&i=0&t=128&pdf=A4&sheet=W1siU1UiXV0%3D linked here]. You may also need to [[#Firmware|update firmware]] to the latest version of the Firmware: OPN2001 Simulation Application to enable the feature.

+

====Advanced Send Mode====

+

You can enable Advanced send mode when scanning the barcode sheet [https://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1&type=1D&i=0&t=128&pdf=A4&sheet=W1siQlBLIl1d linked here]. When the advanced send mode is enabled:

+

*Press (and hold) the scan button for 3 seconds to send stored data.

+

*Press (and hold) the function button for 3 seconds to delete stored data.

+

When the advanced send mode is disabled:

+

*When connected to USB, data is sent and deleted after pressing the Scan button once.

+

To disable Advanced Send mode [https://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1&type=1D&i=0&t=128&pdf=A4&sheet=W1siQlBMIl1d linked here]

==Alternate Firmware==

 This mode allows the OPN2004 to emulate a USB Keyboard. While the OPN2004 is plugged in, any barcodes that are scanned are input wherever the cursor is on screen. When a barcode is scanned while the OPN2004 is disconnected, the barcode is stored in memory. When you want to retrieve scanned barcodes, simply plug the OPN2004 into a computer, and press any key on the device to have it play back all of the barcodes that were scanned while it was disconnected.
-								To use the OPN2004 in USB Keyboard Mode, print and scan this [http://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1 barcode sheet]. You may also need to [[#Firmware|update firmware]] to the latest version of the Firmware: OPN2001 Simulation Application to enable the feature.
+								To use the OPN2004 in USB Keyboard Mode, print and scan the barcode sheet [https://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1&type=1D&i=0&t=128&pdf=A4&sheet=W1siU1UiXV0%3D linked here]. You may also need to [[#Firmware|update firmware]] to the latest version of the Firmware: OPN2001 Simulation Application to enable the feature.
 								====Advanced Send Mode====
 								You can enable Advanced send mode when scanning the barcode sheet [https://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1&type=1D&i=0&t=128&pdf=A4&sheet=W1siQlBLIl1d linked here]. When the advanced send mode is enabled:
 								*Press (and hold) the scan button for 3 seconds to send stored data.
 								*Press (and hold) the function button for 3 seconds to delete stored data.
 								When the advanced send mode is disabled:
 								*When connected to USB, data is sent and deleted after pressing the Scan button once.
 								To disable Advanced Send mode [https://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1&type=1D&i=0&t=128&pdf=A4&sheet=W1siQlBMIl1d linked here]
 ==Alternate Firmware==