| - |
To factory reset the OPN-2001 please follow the below instructions.
|
+ |
To factory reset the OPN-2004 please follow the below instructions.
|
| - |
* Ensure the OPN-2001 has sufficient charge (at the least the laser should come on with a trigger press when the unit is unplugged)
|
+ |
* Ensure the OPN-2004 has sufficient charge (at the least the laser should come on with a trigger press when the unit is unplugged)
|
| - |
* Disconnect the OPN-2001 from any USB connections
|
+ |
* Disconnect the OPN-2004 from any USB connections
|
| |
* Press and hold both buttons (scan and clear) for 10 seconds |
|
* Press and hold both buttons (scan and clear) for 10 seconds |
| |
:At the end of the time you will hear a single tone indicating successful reset. While holding the keys the LED will flash RED (If it flashes any other color you are not holding both buttons firmly enough). |
|
:At the end of the time you will hear a single tone indicating successful reset. While holding the keys the LED will flash RED (If it flashes any other color you are not holding both buttons firmly enough). |
| - |
:'''Note''': It is possible to disable the factory reset option of the OPN-2001 with the SDK (and subsequently our Standard PC Demo Application). If this is disabled this feature will not work until re-enabled.
|
+ |
:'''Note''': It is possible to disable the factory reset option of the OPN-2004 with the SDK (and subsequently our Standard PC Demo Application). If this is disabled this feature will not work until re-enabled.
|
