| Line 40: |
| |
#Click "Delete barcodes" to erase the barcodes stored on the OPN-2004. |
|
#Click "Delete barcodes" to erase the barcodes stored on the OPN-2004. |
| |
|
|
|
| |
|
+ |
==Firmware==
|
| |
|
+ |
While there are multiple components to the firmware on an OPN-2004 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.
|
| |
|
|
|
| |
|
+ |
===Preparation===
|
| |
|
+ |
# Download the Firmware: Bootloader, Firmware: OS, and Appload for this process Available in the [[#Software|software downloads section]]. You may also need Opticon's [[#Drivers|USB Drivers]], so please download those as well.
|
| |
|
+ |
# Download the appropriate Firmware: Application file for your needs. This is most likely to be the OPN2001 Simulation Application, however there are other Applications available. A complete list can be found in the [[#Software|Downloads Section] at the bottom of the page.
|
| |
|
+ |
# Extract the OPN2004 Firmware - OS.zip file, the Appload.zip file, the USB Drivers Installer.zip file, and the OPN2004 Firmware - Application files into a convenient folder.
|
| |
|
+ |
# Install [[Appload]] by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The default values are sufficient for most people, so keep clicking 'Next' until you are finished. Appload will launch at the end of the install process.
|
| |
|
+ |
# Connect the OPN-2004 to your PC
|
| |
|
|
|
| |
|
+ |
===Install the Firmware===
|
| |
|
+ |
# Launch Appload if it is not already running.
|
| |
|
+ |
# We first need to choose the correct COM port. From the main Appload window, select 'Settings' > 'Port', then choose the port that says 'Opticon USB Code Reader'.
|
| |
|
+ |
# Now we can start downloading the OS and Application. For each of the .hex files you downloaded and extracted above, please choose 'File', then 'Download', then navigate to and select the file. You should see a progress indicator and the words 'Initializing IRdA' if this is working.
|
| |
|
+ |
# When complete the OPN-2004 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN-2004 from the PC. instruction manuals for the various applications are available for download in the Downloads section.
|
| |
|
|
|
| |
==Changing the Volume== |
|
==Changing the Volume== |
| |
To change volume options on your OPN2004, please print and scan your desired setting from pages U124-125 in the |
|
To change volume options on your OPN2004, please print and scan your desired setting from pages U124-125 in the |
| Line 85: |
| |
To use the OPN2004 with the OPN Companion Application again, print and scan this [http://opticonfigure.opticon.com/sl/?z=kZ-1&a=4&b=0&d=1 barcode sheet]. |
|
To use the OPN2004 with the OPN Companion Application again, print and scan this [http://opticonfigure.opticon.com/sl/?z=kZ-1&a=4&b=0&d=1 barcode sheet]. |
| |
|
|
|
| - |
==Firmware==
|
|
|
| - |
While there are multiple components to the firmware on an OPN-2004 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.
|
|
|
| |
|
|
|
| - |
===Preparation===
|
|
|
| - |
# Download the Firmware: Bootloader, Firmware: OS, and Appload for this process Available in the [[#Software|software downloads section]]. You may also need Opticon's [[#Drivers|USB Drivers]], so please download those as well.
|
|
|
| - |
# Download the appropriate Firmware: Application file for your needs. This is most likely to be the OPN2001 Simulation Application, however there are other Applications available. A complete list can be found in the [[#Software|Downloads Section] at the bottom of the page.
|
|
|
| - |
# Extract the OPN2004 Firmware - OS.zip file, the Appload.zip file, the USB Drivers Installer.zip file, and the OPN2004 Firmware - Application files into a convenient folder.
|
|
|
| - |
# Install [[Appload]] by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The default values are sufficient for most people, so keep clicking 'Next' until you are finished. Appload will launch at the end of the install process.
|
|
|
| - |
# Connect the OPN-2004 to your PC
|
|
|
| - |
===Install the Firmware===
|
|
|
| - |
# Launch Appload if it is not already running.
|
|
|
| - |
# We first need to choose the correct COM port. From the main Appload window, select 'Settings' > 'Port', then choose the port that says 'Opticon USB Code Reader'.
|
|
|
| - |
# Now we can start downloading the OS and Application. For each of the .hex files you downloaded and extracted above, please choose 'File', then 'Download', then navigate to and select the file. You should see a progress indicator and the words 'Initializing IRdA' if this is working.
|
|
|
| - |
# When complete the OPN-2004 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN-2004 from the PC. instruction manuals for the various applications are available for download in the Downloads section.
|
|
|
| |
==OS Change Log== |
|
==OS Change Log== |
| |
OSE M-Report: M3715 |
|
OSE M-Report: M3715 |
