| - |
:There could be multiple causes for this. Listen for tones or watch the LED's when scanning. If the scanner behaves as if no barcode were present at all the most likely problem is either that the barcode is of poor quality and so cannot be scanner or perhaps that the symbology of the barcode is simply not enabled in the reader. To enable symbologies on the OPN-2002 see chapter 3 of Opticon's [http://www.opticonusa.com/solutions/downloads/Documents/Universal%20Menu%20Book.pdf Universal Menu Book]. If the device beeps in on odd manner and the LED flickers orange it is likely that the OPN-2002 is simply not paired with another device or the device is not reachable at that time. Return the device to range, wake up both devices and try again.
|
+ |
:There could be multiple causes for this. Listen for tones or watch the LED's when scanning. If the scanner behaves as if no barcode were present at all the most likely problem is either that the barcode is of poor quality and so cannot be scanned or perhaps that the symbology of the barcode is simply not enabled in the reader. To enable symbologies on the OPN-2002 see chapter 3 of Opticon's [http://www.opticonusa.com/solutions/downloads/Documents/Universal%20Menu%20Book.pdf Universal Menu Book]. If the device beeps in on odd manner and the LED flickers orange it is likely that the OPN-2002 is simply not paired with another device or the device is not reachable at that time. Return the device to range, wake up both devices and try again.
|
| |
===OPN-2002 won't respond=== |
|
===OPN-2002 won't respond=== |
