Version Differences for OPL9813
|
(→Software)
|
(→Firmware Loading Instructions)
|
| Line 25: | |||
| #*Attach a charged battery to the OPL9813. | #*Attach a charged battery to the OPL9813. | ||
| #*Scan the +-DOWNLOAD-+ at the bottom of the sheet. The unit should beep and show a flashing red LED. | #*Scan the +-DOWNLOAD-+ at the bottom of the sheet. The unit should beep and show a flashing red LED. | ||
| - | #*Drop the unit in the cradle and drag the OS file ([http://ftp.opticonusa.com/Downloads/XBNV010X.zip XBNV0101c.hex] or newer) onto Appload to program the OS. | + | #*Drop the unit in the cradle and drag the OS file onto Appload to program the OS. |
| - | #*After the OS is finished programming, you can immediately drag the Application file ([http://ftp.opticonusa.com/Downloads/XFNS084X.zip XFNS0841.hex] or newer) to program the application. | + | #*After the OS is finished programming, you can immediately drag the Application file to program the application. |
| #*After the application finishes, the unit will beep annoyingly. | #*After the application finishes, the unit will beep annoyingly. | ||
| #*Scan the serial number label on the box to stop the beeping and load the id number. | #*Scan the serial number label on the box to stop the beeping and load the id number. | ||