Version Differences for OPL9813

Line 15:
  *Data can also be transmitted to host via IrDA when OPL9813 is placed in charging cradle    *Data can also be transmitted to host via IrDA when OPL9813 is placed in charging cradle 
  *Two-year warranty    *Two-year warranty 
- Follow these directions for first time setup, software installation, and configuration for transferring data from the {{{prodName}}}.   + Follow these directions for first time setup, software installation, and configuration for transferring data from the OPL9813.  
  ===Setting up the Host===    ===Setting up the Host=== 
  ====Collect Materials====    ====Collect Materials==== 
  You will need the following items.    You will need the following items. 
  * A windows computer    * A windows computer 
- * An {{{prodName}}}   + * An OPL9813  
  * A CRD9723 cradle    * A CRD9723 cradle 
  * A 32-00601-00 power adapter for the CRD9723    * A 32-00601-00 power adapter for the CRD9723 
Line 44:
  # Follow the prompts to finish the installation.     # Follow the prompts to finish the installation.  
  ====Installing NetO32====    ====Installing NetO32==== 
- The {{{prodName}}} uses a piece of windows software called NetO32 to save the data file to the computer. To install NetO32 follow the steps below.   + The OPL9813 uses a piece of windows software called NetO32 to save the data file to the computer. To install NetO32 follow the steps below.  
  # Download NetO32 from the [[#Software|Software Downloads section]].    # Download NetO32 from the [[#Software|Software Downloads section]]. 
  # Open the zip file by double clicking on it.    # Open the zip file by double clicking on it. 
Line 66:
  NetO32 is now in 'Polling' mode. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed.    NetO32 is now in 'Polling' mode. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed. 
       
- ===Starting the Upload from your {{{prodName}}}===   + ===Starting the Upload from your OPL9813===  
       
  After NetO32 is in Polling mode (see [[#Configuring_NetO32|above]]) follow these steps. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed.    After NetO32 is in Polling mode (see [[#Configuring_NetO32|above]]) follow these steps. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed. 
Line 72:
- * Place the {{{prodName}}} nose down in the cradle.   + * Place the OPL9813 nose down in the cradle.  
       
  * The NetO32 status log will indicate that the data was downloaded.    * The NetO32 status log will indicate that the data was downloaded. 
Line 79:
  Follow the Directions above for [[#Installing_USB_Drivers|Installing USB Drivers]]    Follow the Directions above for [[#Installing_USB_Drivers|Installing USB Drivers]] 
  ====Installing Appload====    ====Installing Appload==== 
- # Appload is Opticon's multi-purpose utility for installing firmware onto devices such as the {{{prodName}}}. To install Appload follow the steps below.   + # Appload is Opticon's multi-purpose utility for installing firmware onto devices such as the OPL9813. To install Appload follow the steps below.  
  # Download Appload from the [[#Software|Downloads Software Section]].    # Download Appload from the [[#Software|Downloads Software Section]]. 
  # Open the zip file by double clicking on it.    # Open the zip file by double clicking on it. 
Line 86:
       
  ===Configuring Appload===    ===Configuring Appload=== 
- This section outlines how to configure Appload to communicate with the {{{prodName}}}. Appload is a PC application used to load firmware on most of Opticon's products.   + This section outlines how to configure Appload to communicate with the OPL9813. Appload is a PC application used to load firmware on most of Opticon's products.  
  ====Select COM Port====    ====Select COM Port==== 
  # Select Settings    # Select Settings 
Line 102:
  You will need to download and unzip the appropriate firmware file for the action you wish to perform from the [[#Software|Software Downloads section]].    You will need to download and unzip the appropriate firmware file for the action you wish to perform from the [[#Software|Software Downloads section]]. 
  ===Loading the Firmware===    ===Loading the Firmware=== 
- ===={{{prodName}}} Firmware Setup====   + ====OPL9813 Firmware Setup====  
- * The {{{prodName}}} must be placed into a download mode for firmware to install correctly. To do this follow the steps below.   + * The OPL9813 must be placed into a download mode for firmware to install correctly. To do this follow the steps below.  
  * Print [http://ftp.opticonusa.com/UniversalMenuBook/Factory.png this] barcode sheet.    * Print [http://ftp.opticonusa.com/UniversalMenuBook/Factory.png this] barcode sheet. 
  * Scan the +-DOWNLOAD-+ at the bottom of the sheet. The unit should beep and show a flashing red LED.    * Scan the +-DOWNLOAD-+ at the bottom of the sheet. The unit should beep and show a flashing red LED. 
Line 114:
       
  ==Application Development==    ==Application Development== 
- The {{{prodName}}} firmware is split into two levels, an Operating System and an Application. The Operating System Exposes the functions of the hardware to the Application level firmware, and the Application determines how the device behaves. The Operating System is developed and maintained solely by Opticon, however anyone can make an application for the {{{prodName}}} using using the [[#Software|Renesas RX compiler]]. For code samples please write [mailto:devsupport@opticonusa.com devsupport@opticonusa.com].   + The OPL9813 firmware is split into two levels, an Operating System and an Application. The Operating System Exposes the functions of the hardware to the Application level firmware, and the Application determines how the device behaves. The Operating System is developed and maintained solely by Opticon, however anyone can make an application for the OPL9813 using using the [[#Software|Renesas RX compiler]]. For code samples please write [mailto:devsupport@opticonusa.com devsupport@opticonusa.com].  
       
  ==Downloads==    ==Downloads== 
Line 140:
  {{dtr_NetO32}}    {{dtr_NetO32}} 
  |-    |- 
- | Firmware: OS || This is the latest Operating System firmware file for the {{{prodName}}}.   + | Firmware: OS || This is the latest Operating System firmware file for the OPL9813.  
  |class="center"| XBNV0108    |class="center"| XBNV0108 
  |class="center"| [http://ftp.opticonusa.com/Downloads/XFNS084X.zip Download]    |class="center"| [http://ftp.opticonusa.com/Downloads/XFNS084X.zip Download] 
Line 146:
  {{dtr_C-Library_Kit}}    {{dtr_C-Library_Kit}} 
  |-    |- 
- | Renesas RX compiler || This is the compiler for developing Applications for the {{{prodName}}}.   + | Renesas RX compiler || This is the compiler for developing Applications for the OPL9813.  
  |class="center"|    |class="center"| 
  |class="center"| [http://ftp.opticon.com/rx_compiler_12_02.exe Download]    |class="center"| [http://ftp.opticon.com/rx_compiler_12_02.exe Download]