| |
|
+ |
==Firmware Loading Instructions==
|
| |
|
+ |
#Update Appload (Load.dll)
|
| |
|
+ |
#*Open Appload. Open the About box. Note the path shown for LoadDLL location.
|
| |
|
+ |
#*Copy Load.dll version EGF3409H (2.0.17.0) or newer there.
|
| |
|
+ |
#Print the label sheet [http://ftp.opticonusa.com/UniversalMenuBook/Factory.png here.]
|
| |
|
+ |
#*Attach a charged battery to the OPL9813.
|
| |
|
+ |
#*Scan the +-DOWNLOAD-+ at the bottom of the sheet. The unit should beep and show a flashing red LED.
|
| |
|
+ |
#*Drop the unit in the cradle and drag the OS file ([http://ftp.opticonusa.com/Downloads/XBNV010X.zip XBNV0101c.hex] or newer) onto Appload to program the OS.
|
| |
|
+ |
#*After the OS is finished programming, you can immediately drag the Application file ([http://ftp.opticonusa.com/Downloads/XFNS084X.zip XFNS0841.hex] or newer) to program the application.
|
| |
|
+ |
#*After the application finishes, the unit will beep annoyingly.
|
| |
|
+ |
#*Scan the serial number label on the box to stop the beeping and load the id number.
|
| |
[[Category:Data Collector]] |
|
[[Category:Data Collector]] |
