| |
See [http://www.opticonusa.com/products/handheld-solutions/opl9725.html here] for general information about the OPL9725. |
|
See [http://www.opticonusa.com/products/handheld-solutions/opl9725.html here] for general information about the OPL9725. |
| - |
==Device Instructions==
|
+ |
{{OPL97XX|prodName = OPL9729|p = setup}}
|
| - |
===Firmware Loading===
|
+ |
{{OPL97XX|prodName = OPL9723|p = fwLoad}}
|
| - |
The following process is used to load firmware onto the OPL9725. Firmware for the OPL9725 is divided into two parts: the OS and an Application file. Both pieces use the same instructions for loading, the only part that changes is the actual file you load. See the downloads section for all available files.
|
|
|
| - |
* Setup and attach the cradle to the PC with which you will be loading firmware onto the device.
|
|
|
| - |
* Place the OPL9725 in the cradle (top down as always).
|
|
|
| - |
* Using Appload select 'Settings' > 'Port' and choose the COM port the cradle is connected to.
|
|
|
| - |
* Using Appload select 'File' > 'Download' and choose the file you wish to load.
|
|
|
| - |
* Wait until Appload reports success, you can now remove the OPL9725 from the cradle.
|
|
|
