| |
#Instead of using NetO32 on the PC, open up OpticonRL. Select 'Settings', and then the COM port for the OPL-9724. From the menu that pops out, select 'Toggle On/Off'. Immediately click on the window you opened earlier. The data will transmit within a few seconds. |
|
#Instead of using NetO32 on the PC, open up OpticonRL. Select 'Settings', and then the COM port for the OPL-9724. From the menu that pops out, select 'Toggle On/Off'. Immediately click on the window you opened earlier. The data will transmit within a few seconds. |
| - |
==Using Real-time Scanning Mode with [[OpticonRL]]==
|
+ |
==Using Real-time Scanning Mode with [[OpticonRL]] for Windows==
|
| |
Using Real Mode with OpticonRL is largely the same as using Batch Mode. There are a few different settings that need to be set, and the behavior of the device will be different. If you are trying to use the device to scan and send barcode data in real time then this is the best option. The following sections will guide you through the initial out-of-box setup for Real-time Scanning Mode on the OPL-9724. |
|
Using Real Mode with OpticonRL is largely the same as using Batch Mode. There are a few different settings that need to be set, and the behavior of the device will be different. If you are trying to use the device to scan and send barcode data in real time then this is the best option. The following sections will guide you through the initial out-of-box setup for Real-time Scanning Mode on the OPL-9724. |
