Version Differences for OPL9724

(→Using the OPL-9724 In Batch Mode With NetO32)
Line 96:
  Batch mode scanning has the device send and receive data in files. It does not require the device to maintain a connection while scanning barcodes. It can be a little more complicated, however.    Batch mode scanning has the device send and receive data in files. It does not require the device to maintain a connection while scanning barcodes. It can be a little more complicated, however. 
       
- ===On the Device:===   + ===On the Device===  
  Clearing the Bluetooth Address - From Main screen, navigate to 'System Menu'->Bluetooth->'Clear BT Addr'. (Navigate up or down by pressing the '1' or '2' buttons, and select options by pressing the center key.)    Clearing the Bluetooth Address - From Main screen, navigate to 'System Menu'->Bluetooth->'Clear BT Addr'. (Navigate up or down by pressing the '1' or '2' buttons, and select options by pressing the center key.) 
  Choose 'Yes' when prompted.    Choose 'Yes' when prompted. 
Line 114:
  When you are finished inputting your PIN code and you have confirmed it, the scanner will attempt to pair with the computer.     When you are finished inputting your PIN code and you have confirmed it, the scanner will attempt to pair with the computer.  
       
- ===On the Computer:===   + ===On the Computer===  
       
  Windows will inform you that the OPL-9724 is attempting to pair. Follow the instructions from Windows, and enter the PIN code you selected earlier when prompted. After a few seconds the device will be paired.    Windows will inform you that the OPL-9724 is attempting to pair. Follow the instructions from Windows, and enter the PIN code you selected earlier when prompted. After a few seconds the device will be paired. 
Line 138:
       
  ===Transmitting Data With the OPL-9724===    ===Transmitting Data With the OPL-9724=== 
- If you have followed the pairing instructions from above, then subsequent transmissions become after the first pairing attempt:   + After you have followed the pairing instructions from above, subsequent transmissions are much simpler.  
       
  #Open NetO32, and load your settings by selecting 'File'->'Open' then choosing the file where you saved your settings.    #Open NetO32, and load your settings by selecting 'File'->'Open' then choosing the file where you saved your settings.