| - |
The following process is used to load firmware onto the PX35. Firmware for the PX35 is divided into two parts: the OS and an Application file. Both pieces use the same instructions for loading, the only part that changes is the actual file you load. See the downloads section for all available files.
|
+ |
The following process is used to load firmware onto the OPL9723. Firmware for the OPL9723 is divided into two parts: the OS and an Application file. Both pieces use the same instructions for loading, the only part that changes is the actual file you load. See the downloads section for all available files.
|
| |
* Setup and attach the cradle to the PC with which you will be loading firmware onto the device. |
|
* Setup and attach the cradle to the PC with which you will be loading firmware onto the device. |
| |
* On the OPL9723 press together the three button below the display (Q1, Q2, and TRIGGER). This will enter the OS' System Menu. |
|
* On the OPL9723 press together the three button below the display (Q1, Q2, and TRIGGER). This will enter the OS' System Menu. |
