Version Differences for OPI2201

(→Software)

(→Take Picture)

 ==Take Picture==
 [[Take Picture]] works with the OPI2201.
 								===Firmware Loading===
 								<ol>
 								<li>Install the All In One PC Drivers from the Drivers Downloads section of the knowledge base page for the OP2201, located here: https://wiki.opticonusa.com/techsupport/en/OPI2201#Drivers</li>
 								<li>Scan the interface type configuration barcode for USB VCP, located here: https://wiki.opticonusa.com/techsupport/en/OPI2201#Change_the_interface_type</li>
 								<li> Download and install Appload, available in the Software Downloads section of the knowledge base page for the OPI2201, located here: https://wiki.opticonusa.com/techsupport/en/OPI2201#Software</li>
 								<li> Download the Firmware OS. This download will contain two firmware files, Bootloader: Boot.bin and OS: FL37J15.bin. Please make sure to extract these from the .zip file you downloaded them from.</li>
 								<li>Plug your scanner into the computer and open up Appload</li>
 								<li>In Appload, click on  Settings > Port > Opticon USB Code Reader (2D) (COM x).<li>
 								<li>Choose File > Download and then navigate to the location of the two .bin files you extracted and first select Boot.bin. Once the download is successfully completed, choose File > Download and select FL37J15.bin.</li>
 ==Downloads==