Version Differences for OPH5000i

(→Software)
(→WiFi)
Line 26:
       
  ===WiFi===    ===WiFi=== 
- The OPH5000i is able to transfer barcodes over your WiFi network using the OPH5k desktop application. You may have to configure your security settings to allow the OPH5K application and OPH5000i device to communicate.   + The OPH5000i is able to transfer barcodes over your WiFi network using the OPH5k desktop application.  
       
- #Download and install OPH5K application from the [[#Software|Software Downloads section]]   + *Note: You may have to configure your security settings to allow the OPH5K application and OPH5000i device to communicate over the network.  
       
    + #Download and install the OPH5K application from the [[#Software|Software Downloads section]]  
  #Connect to an AP: Navigate to System menu (hold Q1 + Q2) -> Settings menu -> WLAN settings -> Wireless settings -> Profile settings (F1) -> Add new profile (F2) -> Scan AP. Select the network you want to connect to and enter the credential. The system will save the AP, so you only need to do this once. *NOTE: the desktop app and the terminal must be on the same network for them to communicate.    #Connect to an AP: Navigate to System menu (hold Q1 + Q2) -> Settings menu -> WLAN settings -> Wireless settings -> Profile settings (F1) -> Add new profile (F2) -> Scan AP. Select the network you want to connect to and enter the credential. The system will save the AP, so you only need to do this once. *NOTE: the desktop app and the terminal must be on the same network for them to communicate. 
  #Pair the OPH5K to the desktop app: Start the desktop app and click on Pair. Go to System Menu (in the app) -> Server Address -> New and scan the QR code. Make sure the address matches what’s shown on the desktop app. The server address will be saved and does not need to be scanned again unless it changes.     #Pair the OPH5K to the desktop app: Start the desktop app and click on Pair. Go to System Menu (in the app) -> Server Address -> New and scan the QR code. Make sure the address matches what’s shown on the desktop app. The server address will be saved and does not need to be scanned again unless it changes.