Version Differences for OPH5000i

(→MSD Mode)

(→PAC file)

 ===PAC file===
 								The PAC file is the easiest way to update all parts of the scanner's firmware and software at one time with no additional software or drivers needing to be downloaded or installed making this an ideal solution for most.
-								To install the PAC file, switch to MSD mode and copy it to the USB drive. Go to the system menu (hold Q1 +Q2 buttons) and navigate to 4. Install menu -> 1. Install and select the PAC file and follow the instructions.
+								To install the PAC file follow the directions below:
 								# Download the PAC File from the [[#Software|Software Downloads section]]
 								# Switch to MSD mode
 								## From the main screen of the handheld scroll down to 'MSD Mode' and select it.
 								## On the next screen you will be prompted to press 'ENT' to enable MSD data transfers and the terminal will reset.
 								## Connect to your PC and after a few moments a new Windows Explorer window labeled 'USB Drive'
 								## Copy the PAC File to the USB Drive and then tap the 'BS' button to exit to the main menu.
 								# Go to the system menu by holding the 'Q1' & 'Q2' buttons at the same time.
 								# Navigate to 4. Install menu -> 1. Install and select the PAC file and press the 'ENT' button.
 								# The Scanner may restart several times during the update process, once complete the scanner will prompt you 'Update Complete! Press BS to exit'.
 								Your scanner is now fully updated.
 ==Downloads==