Version Differences for OPH5000i - Opticon Technical Support Portal

#On the next screen you will be prompted to press 'ENT' to enable MSD data transfers and the terminal will reset.

#Connect to your PC and after a few moments a new Windows Explorer window labeled USB Drive and you will see the DATA.TXT file with the stored barcode data.

+

#Once the data is transferred tap the BS button to exit.

===WiFi===

The OPH5000i is able to transfer barcodes over your WiFi network using the OPH5k desktop application. You may have to configure your security settings to allow the OPH5K application and OPH5000i device to communicate.

#Set Download Protocol to wifi: Go to System Menu (in the app) -> Protocol and select WiFi protocol.

===OSEComm===

-

Opticon's Demo Applications for the OPH5000i support downloading of data through Opticon's proprietary protocol called OSEComm32 ([[OseComm32]]). As with all communications, there are two sides. In this case, these are the OPH5000i and the host, a PC. In most situations, the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC for processing.

+

Opticon's Demo Applications for the OPH5000i support downloading of data through Opticon's proprietary protocol called OSEComm. As with all communications, there are two sides. In this case, these are the OPH5000i and the host, a PC. In most situations, the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC for processing.

-

This section covers setting up and using [[OseComm32]], our application for sending and receiving data using the OSEComm protocol.

+

This section covers setting up and using OseComm32, our application for sending and receiving data using the OSEComm protocol.

====Software Installation====

 #On the next screen you will be prompted to press 'ENT' to enable MSD data transfers and the terminal will reset.
 #Connect to your PC and after a few moments a new Windows Explorer window labeled USB Drive and you will see the DATA.TXT file with the stored barcode data.
 								#Once the data is transferred tap the BS button to exit.
 ===WiFi===
 The OPH5000i is able to transfer barcodes over your WiFi network using the OPH5k desktop application. You may have to configure your security settings to allow the OPH5K application and OPH5000i device to communicate.
 #Set Download Protocol to wifi: Go to System Menu (in the app) -> Protocol and select WiFi protocol.
 ===OSEComm===
-								Opticon's Demo Applications for the OPH5000i support downloading of data through Opticon's proprietary protocol called OSEComm32 ([[OseComm32]]). As with all communications, there are two sides. In this case, these are the OPH5000i and the host, a PC. In most situations, the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC for processing.
+								Opticon's Demo Applications for the OPH5000i support downloading of data through Opticon's proprietary protocol called OSEComm. As with all communications, there are two sides. In this case, these are the OPH5000i and the host, a PC. In most situations, the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC for processing.
-								This section covers setting up and using [[OseComm32]], our application for sending and receiving data using the OSEComm protocol.
+								This section covers setting up and using OseComm32, our application for sending and receiving data using the OSEComm protocol.
 ====Software Installation====