Version Differences for OPH5000i

(→Starting the Upload from your OPH5000i)
(→Starting the Upload from your OPH5000i)
Line 80:
  ====Starting the Upload from your OPH5000i====    ====Starting the Upload from your OPH5000i==== 
  After OSEComm is in Polling mode (see above) we are ready to download data from the OPH5000i.    After OSEComm is in Polling mode (see above) we are ready to download data from the OPH5000i. 
- * Set Download Protocol to OSEComm: Go to System Menu (in the app) -> Protocol and select OSEComm protocol.      
    + * Set Download Protocol to OSEComm: Go to System Menu (in the app) -> Protocol and select OSECom protocol.  
  * Select 'Transmit Data' from the main menu by using the arrow keys to move up and down and Scan to select an option. The correct option is pictured at right.    * Select 'Transmit Data' from the main menu by using the arrow keys to move up and down and Scan to select an option. The correct option is pictured at right. 
- ** The screen that appears should say "Transmit Data NETO Protocol."   + ** The screen that appears should say "Transmit Data OSECOmm Protocol."  
  * OSEComm will indicate that the data was downloaded by saying "Download Complete." The OPH5000i will then go back to the main menu transmit data screen.    * OSEComm will indicate that the data was downloaded by saying "Download Complete." The OPH5000i will then go back to the main menu transmit data screen.