| |
====Starting the Upload from your OPH5000i==== |
|
====Starting the Upload from your OPH5000i==== |
| |
After OSEComm is in Polling mode (see above) we are ready to download data from the OPH5000i. |
|
After OSEComm is in Polling mode (see above) we are ready to download data from the OPH5000i. |
| - |
# Select 'Transmit Data' from the main menu by using the arrow keys to move up and down and Scan to select an option. The correct option is pictured at right.
|
+ |
* Set Download Protocol to OSEComm: Go to System Menu (in the app) -> Protocol and select OSEComm protocol.
|
| - |
::The screen that appears should say "Transmit Data NETO Protocol."
|
+ |
* Select 'Transmit Data' from the main menu by using the arrow keys to move up and down and Scan to select an option. The correct option is pictured at right.
|
| - |
# OSEComm will indicate that the data was downloaded by saying "Download Complete." The OPH5000i will then go back to the main menu transmit data screen.
|
+ |
** The screen that appears should say "Transmit Data NETO Protocol."
|
| |
|
+ |
* OSEComm will indicate that the data was downloaded by saying "Download Complete." The OPH5000i will then go back to the main menu transmit data screen.
|
| |
You can find the data file in the folder you chose above. |
|
You can find the data file in the folder you chose above. |
