Version Differences for OPH5000i

Revision as of 08 December 2021 15:12

(→Downloading Data Files)

Revision as of 07 January 2022 14:10

(→Downloading Data Files)

 You can find the data file in the folder you chose above.
 ===MSD Mode===
-								*On the handheld scroll down to 'MSD Mode' and use Scan to select.
+								#On the handheld scroll down to 'MSD Mode' and use Scan to select.
-								*On the next screen you will be Prompted 'ENT' to enable MSD data transfers and the terminal will reset.
+								#On the next screen you will be Prompted 'ENT' to enable MSD data transfers and the terminal will reset.
-								*Connect to your PC and after a few moments a new Windows Explorer window labeled USB Drive and you will see the DATA.TXT file with the stored barcode data.
+								#Connect to your PC and after a few moments a new Windows Explorer window labeled USB Drive and you will see the DATA.TXT file with the stored barcode data.
 ===WiFi===
 								The OPH5000i is able to transfer barcodes over your WiFi network using the OPH5k desktop application.
 								#Download and install OPH5K application from [[Software]]
 								#Connect to an AP: Navigate to System menu (hold Q1 + Q2) -> Settings menu -> WLAN settings -> Wireless settings -> Profile settings (F1) -> Add new profile (F2) -> Scan AP. Select the network you want to connect to and enter the credential. The system will save the AP, so you only need to do this once. *NOTE: the desktop app and the terminal must be on the same network for them to communicate.
 								#Pair the OPH5K to the desktop app: Start the desktop app and click on Pair. Go to System Menu (in the app) -> Server Address -> New and scan the QR code. Make sure the address matches what’s shown on the desktop app. The server address will be saved and does not need to be scanned again unless it changes.
 								#Set Download Protocol to wifi: Go to System Menu (in the app) -> Protocol and select WiFi protocol.
 -->