Version Differences for OPH1005

(→Software)
(→Downloading Data Files)
Line 21:
  This section covers setting up and using [[NetO32]], our application for sending and receiving data using the NetO protocol.    This section covers setting up and using [[NetO32]], our application for sending and receiving data using the NetO protocol. 
       
- NetO32 can be downloaded from the [[#Software|Downloads Table]]. Simply run the installer after download is complete and follow the prompts. When it is complete, start the NetO32 application on your computer. You will be presented with a main screen and some options menus.   + ===Software Installation===  
    + In this section we step through installing both Opticon's USB drivers and NetO32.  
    + ====Installing USB Drivers====  
    + If you are using RS232 please skip to Installing NetO32. Opticon's USB drivers need to be installed for the cradle to be properly via USB.  
    + # Download the USB drivers from the [[#Drivers|Driver Downloads section]].  
    + # Open the zip file by double clicking on it.  
    + # Launch the installer by double clicking on it.  
    + # Follow the prompts to finish the installation.  
    + ====Installing NetO32====  
    + The OPH1005 uses a piece of windows software called NetO32 to save the data file to the computer. To install NetO32 follow the steps below.  
    + # Download NetO32 from the [[#Software|Software Downloads section]].  
    + # Open the zip file by double clicking on it.  
    + # Launch the installer by double clicking on it.  
    + # Follow the prompts to finish the installation.  
  ===Setting Up the Host===    ===Setting Up the Host=== 
  [[Image:NetO32_RS232_Settings.png|thumb|RS232 Settings]]    [[Image:NetO32_RS232_Settings.png|thumb|RS232 Settings]] 
Line 50:
  When you are done using NetO32 simply select 'Protocol', then 'Stop' and NetO32 will stop polling. The application can then be closed.    When you are done using NetO32 simply select 'Protocol', then 'Stop' and NetO32 will stop polling. The application can then be closed. 
       
- <br clear=all>      
  ===Starting the Upload from your OPH1005===    ===Starting the Upload from your OPH1005=== 
  After NetO32 is in Polling mode (see above) we are ready to download data from the OPH-1005.    After NetO32 is in Polling mode (see above) we are ready to download data from the OPH-1005.