Version Differences for NLV4001

Line 1:
    + ==Firmware Loading==  
    + Follow the directions below to load firmware on to the NLV4001.  
    + # Download and install the [[#Drivers USB Drivers]].  
    + # Download and install the firmware loading utility Appload from the [[#Software Software Downloads]] section.  
    + # Download the Firmware: OS from the [[#Software Software Downloads]] section.  
    + # With the NLV4001 connected to the computer, launch [[Appload]].  
    + # In Appload, select ''''Settings' > 'Port' > 'Opticon USB Code Reader(1D) (COMx)''''  
    + # In Appload, select ''''File' > 'Download'''' and browse to the firmware file (e.g. TC27J02) and click ''''Open''''  
    + #: Once the firmware has been loaded you will see the message 'Download successfully completed'  
       
    + ==Downloads==  
       
    + {{EULA_Block}}  
       
    + {{dt_header|Software}}  
    + |-  
    + {{dtr_Appload}}  
    + |-  
    + | Firmware: OS || The Operating System for the NLV4001. [[Appload]] (see above) is required for loading the OS onto the NLV4001. Please contact [mailto:support@opticonusa.com Technical Support] for the latest firmware version.  
    + | class="center" |  
    + | class="center" | [mailto:support@opticonusa.com Contact Support]  
    + |-  
    + {{table_end}}  
    + ===Drivers===  
       
    + {{dt_header|Driver}}  
    + |-  
    + {{dtr_usb_drivers_allinone_pc}}  
    + |-  
    + {{dtr_Mac_Driver_Lib}}  
    + |-  
    + {{table_end}}