Version Differences for NLV1001
|
(→DataWizard)
|
(→Firmware Upgrade)
|
| Line 40: | |||
| ====[[Change Interfaces]]==== | ====[[Change Interfaces]]==== | ||
| A RS232 model cannot be changed to a USB model (or visa-versa) by just changing the cable and scanning a configuration scan code. The internal boards are stuffed differently. (confirmed 6/25/13). However a USB model can change for HID mode to VCP mode (or visa-versa) by scanning the appropriate USB default scan code. | A RS232 model cannot be changed to a USB model (or visa-versa) by just changing the cable and scanning a configuration scan code. The internal boards are stuffed differently. (confirmed 6/25/13). However a USB model can change for HID mode to VCP mode (or visa-versa) by scanning the appropriate USB default scan code. | ||
| + | ==Technical== | ||
| + | For technical information on the OK or NG signals, click here: [[XLB1000 OK/NG]] | ||
| ==Firmware Upgrade== | ==Firmware Upgrade== | ||
| * See [[#Determining Your Current Firmware|Determining Your Current Firmware]] to ensure you load the correct firmware onto your NLV1001 unit. | * See [[#Determining Your Current Firmware|Determining Your Current Firmware]] to ensure you load the correct firmware onto your NLV1001 unit. | ||