Version Differences for Menu Commands - Opticon Technical Support Portal

For example, to issue the 'Z1' command, simply type <Esc>Z1<Enter>. Note the lack of start/stop characters, which are not neccessary when you pass Menu Commands over a COM port as opposed to scanning them. Our devices are case sensitive, so make sure the case of the command matches exactly what is in the [[Universal Menu Book]]. Opticon's scanners usually only respond to a subset of the Menu Commands present in the [[Universal Menu Book]], so this may not work for all of our scanners.

-

If you would like to output settings using software other than Appload, then observe the proper RS232 settings for the scanner you are trying to communicate with. For each Menu Command you want to output, start with the ASCII <Escape> character, followed by the ASCII <Carriage Return> character.

+

If you would like to output settings using software other than Appload, then observe the proper RS232 settings for the scanner you are trying to communicate with. For each Menu Command you want to output, start with the ASCII <Escape> character, followed by the ASCII <Carriage Return> character.

== Download Fonts ==

 For example, to issue the 'Z1' command, simply type <Esc>Z1<Enter>. Note the lack of start/stop characters, which are not neccessary when you pass Menu Commands over a COM port as opposed to scanning them. Our devices are case sensitive, so make sure the case of the command matches exactly what is in the [[Universal Menu Book]]. Opticon's scanners usually only respond to a subset of the Menu Commands present in the [[Universal Menu Book]], so this may not work for all of our scanners.
 								If you would like to output settings using software other than Appload, then observe the proper RS232 settings for the scanner you are trying to communicate with. For each Menu Command you want to output, start with the ASCII <Escape> character, followed by the ASCII <Carriage Return> character.
 == Download Fonts ==