| Line 1: |
| |
|
+ |
[[Image:m11sidebyside.png||Right|900px|]]
|
| |
==About== |
|
==About== |
| |
|
|
|
| |
The M-11 is an omni-directional scanner for on top of the counter as built-in. This scanner comes with high performance 2D CMOS Imager along with a well thought out design. The M-11 can be used as built in scanner in parking areas or as a stationary scanner on the counter in retail. Because the M-11 can be embedded into your built in scanning solution, the M-11 is perfectly suited for scanning passports and ID as well. Of course these are just examples as the M-11 can bring a scanning solution to any business. |
|
The M-11 is an omni-directional scanner for on top of the counter as built-in. This scanner comes with high performance 2D CMOS Imager along with a well thought out design. The M-11 can be used as built in scanner in parking areas or as a stationary scanner on the counter in retail. Because the M-11 can be embedded into your built in scanning solution, the M-11 is perfectly suited for scanning passports and ID as well. Of course these are just examples as the M-11 can bring a scanning solution to any business. |
| |
|
|
|
| Line 15: |
| |
*Flexible cable outlet – 4 directions |
|
*Flexible cable outlet – 4 directions |
| |
|
|
|
| - |
==How To==
|
+ |
==Default Command Codes==
|
| |
|
|
|
| - |
===How to change the USB interface type===
|
+ |
===Scan either barcode below to change the interface mode===
|
| - |
[[Image:800px-Interface Change 2D.JPG]]
|
+ |
[[Image:menucodeforl22x.png |Thumb|left|400px|]]
|
| |
|
|
|
| - |
===Restore Default Settings===
|
+ |
==Interface Modes==
|
| - |
* [http://opticonfigure.opticon.com/sl/?z=R1.AQ&a=4&b=0&d=1 USB COM Port]: Use this sheet if you have a USB interface and you are running software which requires a COM port to receive data from the scanner.
|
+ |
<h3>USB-HID Keyboard Emulation</h3>
|
| - |
* [http://opticonfigure.opticon.com/sl/?z=R1.ki&a=4&b=0&d=1 USB Keyboard(HID)]: Use this sheet if you have a USB interface and you would like the flexibility of scanning wherever your keyboard cursor is on your screen.
|
+ |
This will be the most convenient interface for you to use as it doesn't require the use of special drivers or software. You can simply place your cursor where you want the barcode data to go, point, and scan.
|
| |
|
|
|
| - |
===Configure the Scanner===
|
+ |
To use this interface click on [http://ftp.opticonusa.com/Downloads/mdi4100interfacemodebarcodes.pdf Interface Mode]: and scan the USB-HID barcode to configure the M-11 in USB-HID keyboard mode.
|
| |
|
|
|
| |
|
+ |
<h3>USB-VCP Serial Port Emulation</h3>
|
| |
|
+ |
If your software requires the use of a serial port to transmit and receive data, then you must choose this mode if you own a M-11. First, download and install our [http://ftp.opticonusa.com/Downloads/USB%20Drivers%20Installer.zip USB Drivers], then click on [http://ftp.opticonusa.com/Downloads/mdi4100interfacemodebarcodes.pdf Interface Mode]: and scan the USB-VCP barcode to configure the M-11 in USB-VCP mode. After this, your PC will automatically detect that the M-11 is connected in Serial Port mode and will install the correct drivers.
|
| |
|
|
|
| |
|
+ |
==Configure the Scanner==
|
| |
|
|
|
| |
The output of this barcode reader can be modified in several different manners. Using several different tools. The following tools are available for you to use in configuring your scanner. Please submit a ticket above for assistance from Opticon's Technical Support Team. |
|
The output of this barcode reader can be modified in several different manners. Using several different tools. The following tools are available for you to use in configuring your scanner. Please submit a ticket above for assistance from Opticon's Technical Support Team. |
