(→USB Serial Drivers for USB-COM Mode)
|
(→USB Serial Drivers for USB-COM Mode)
|
Line 19: | |||
* CDC = Communications Device Class | * CDC = Communications Device Class | ||
+ | ==Using USB to Serial adapters in Linux== | ||
+ | For Linux operating systems, activate the CONFIG_USB_SERIAL_FTDI_SIO config option and rebuild the kernel, or: | ||
+ | # cd /usr/src/linux && make menuconfig | ||
+ | Linux > Device Drivers > USB > USB Serial Converter > USB FTDI Single Port Serial Driver | ||
+ | # make bzImage && make modules && make modules_install && make install | ||
+ | Should see something within syslog similar to the following: | ||
+ | Product: FT232R USB UART | ||
+ | Manufacturer: FTDI | ||
+ | SerialNumber: XXXXXXXX | ||
+ | Detected FT232RL | ||
+ | FTDI USB Serial Device converter now attached to ttyUSB0 | ||
==Bluetooth== | ==Bluetooth== | ||
Many modern Linux distributions also provide good support for Bluetooth through the BlueZ stack, which has a comprehensive list of Bluetooth profiles that it supports. Opticon's devices transmit data over Bluetooth in one of two ways. They present themselves in either SPP-mode profile, with an accompanying serial port, or in HID-mode profile, where they present as any other HID device. | Many modern Linux distributions also provide good support for Bluetooth through the BlueZ stack, which has a comprehensive list of Bluetooth profiles that it supports. Opticon's devices transmit data over Bluetooth in one of two ways. They present themselves in either SPP-mode profile, with an accompanying serial port, or in HID-mode profile, where they present as any other HID device. |