Version Differences for H21 - Opticon Technical Support Portal

** '''Clipboard''': When this option is selected, data is first copied into the devices clipboard and then transmitted to the screen. This option is the default.

* '''Special Suffix''': This option allows you to configure a custom suffix that is appended to the end of every barcode transmission. Developers note that this suffix is appended after data has been transmitted from the scanner. This suffix is not added by the barcode scanner. See the '''Additional Settings''' section for additional prefix and suffix options.

-

* '''Good read notification''': This option allows you to configure what happens when a barcode is successfully decoded. The '''Buzzer''' option emits an audible notification. The '''Vibrator''' option causes the vibrator to activate for a moment upon each successful decode.

+

* '''Good read notification''': This option allows you to configure what happens when a barcode is successfully decoded. The four options are as follows. Please note that the Confirm button is used to test settings while making selections and to enable a setting after making a selection.

+

**The '''Buzzer''' option emits an audible notification, by playing a the .wav file selected in the drop box at the bottom of the screen.

+

**The '''Vibrator''' option causes the vibrator to activate for a moment upon each successful decode thus providing the user with haptic feedback.

+

**The '''Buzzer and vibrator''' provides both of the above forms of feedback.

+

**The '''None''' option provides no form of good read notification.

====Code Options====

The '''Code Options''' tab allows you to configure what barcode symbologies are enabled and allows configuration of a variety of options specific to each symbology. A check mark next to a symbology name means that barcodes of the given symbology can be scanned. Additional settings specific to each symbology can be found by tap-holding a symbology name and then selecting the sub symbology name from the list that appears.

 ** '''Clipboard''': When this option is selected, data is first copied into the devices clipboard and then transmitted to the screen. This option is the default.
 * '''Special Suffix''': This option allows you to configure a custom suffix that is appended to the end of every barcode transmission. Developers note that this suffix is appended after data has been transmitted from the scanner. This suffix is not added by the barcode scanner. See the '''Additional Settings''' section for additional prefix and suffix options.
-								* '''Good read notification''': This option allows you to configure what happens when a barcode is successfully decoded. The '''Buzzer''' option emits an audible notification. The '''Vibrator''' option causes the vibrator to activate for a moment upon each successful decode.
+								* '''Good read notification''': This option allows you to configure what happens when a barcode is successfully decoded. The four options are as follows.  Please note that the Confirm button is used to test settings while making selections and to enable a setting after making a selection.
 								**The '''Buzzer''' option emits an audible notification, by playing a the .wav file selected in the drop box at the bottom of the screen.
 								**The '''Vibrator''' option causes the vibrator to activate for a moment upon each successful decode thus providing the user with haptic feedback.
 								**The '''Buzzer and vibrator''' provides both of the above forms of feedback.
 								**The '''None''' option provides no form of good read notification.
 ====Code Options====
 The '''Code Options''' tab allows you to configure what barcode symbologies are enabled and allows configuration of a variety of options specific to each symbology. A check mark next to a symbology name means that barcodes of the given symbology can be scanned. Additional settings specific to each symbology can be found by tap-holding a symbology name and then selecting the sub symbology name from the list that appears.