| Line 137: |
| |
:*The Opticon Logo screen will appear and the device will continue to boot. It will take longer this time than normal and when complete you will see the Windows Mobile initial setup screen. |
|
:*The Opticon Logo screen will appear and the device will continue to boot. It will take longer this time than normal and when complete you will see the Windows Mobile initial setup screen. |
| |
|
|
|
| - |
==OS Release Log==
|
+ |
==Changing Menu Book Options==
|
| |
|
+ |
Our Windows Mobile Smartphone devices (H16, H19, and H21) are configured in a little bit of a different manner than regular barcode scanners. To configure the H19 with the options you will find in the universal menu book please follow the instructions below.
|
| |
|
|
|
| |
|
+ |
To use commands from the universal menu book:
|
| |
|
+ |
*1. Tap on the barcode icon on top of the screen
|
| |
|
+ |
*2. go to settings-->menu codes-->hit edit
|
| |
|
+ |
*3. Type the serial command for the setting you would like to use. The default setting is "RZ" to set suffix for all codes "1M" for Carriage return and is typed in as "RZ1M".To add additional preferences type the serial command for those preferences imediatly after the current settings. For example "RZ1ME8" will change UPC-E to transmit its leading digit, and will still place a carriage return after each barcode.
|
| |
|
+ |
*4. hit OK-->X-->Update
|
| |
|
|
|
| |
|
+ |
Please note than most of the commands in the universal menu book can be used to change settings in this menu. For the serial commands that contain more than two characters you will need to preface the command with one of these.
|
| |
|
+ |
*"]" means the next three letters are one code
|
| |
|
+ |
*"[" means the next four letters are one code
|
| |
|
|
|
| |
|
+ |
A few common options are:
|
| |
|
|
|
| |
|
+ |
To change UPC-E to transmit its leading digit:
|
| |
|
+ |
*1. Tap on the barcode icon on top of the screen
|
| |
|
+ |
*2. go to settings-->menu codes-->hit edit
|
| |
|
+ |
*3. Type E8 after RZ1M
|
| |
|
+ |
*4. hit OK-->X-->Update
|
| |
|
|
|
| |
|
+ |
To have UPC-E transmitted as UPC-A instead:
|
| |
|
+ |
*1. Tap on the barcode icon on top of the screen
|
| |
|
+ |
*2. go to settings-->menu codes-->hit edit
|
| |
|
+ |
*3. Type 6P after RZ1M
|
| |
|
+ |
*4. hit OK-->X-->Update
|
| |
|
|
|
| |
|
+ |
To have both UPC-E as UPC-A and transmit UPC-E leadings zero:
|
| |
|
+ |
*1. Tap on the barcode icon on top of the screen
|
| |
|
+ |
*2. go to settings-->menu codes-->hit edit
|
| |
|
+ |
*3. Type 6PE8 after RZ1M
|
| |
|
+ |
*4. hit OK-->X-->Update
|
| |
|
|
|
| |
|
+ |
To only show the middle 10 digits of UPC A (this is the most common call regarding UPS barcodes)
|
| |
|
+ |
*1. Tap on the barcode icon on top of the screen
|
| |
|
+ |
*2. go to settings-->menu codes-->hit edit
|
| |
|
+ |
*3. Type E5[A00[A0X0C[A0Y[A10[A14Q0Q1[A1CQ0Q0[A1L[A18[A1F after RZ1M
|
| |
|
+ |
*4. hit OK-->X-->Update
|
| |
==Links== |
|
==Links== |
| |
|
|
|
