Version Differences for H15
|
(Added downloads table, OS upgrade steps and some usage instructions)
|
(Added Bluetooth ActiveSync steps)
|
| Line 34: | |||
| To determine your current firmware navigate to the following path: | To determine your current firmware navigate to the following path: | ||
| * 'Start' > 'Settings' > 'Control Panel' > 'Control Center' > 'Information' > 'OS Version' | * 'Start' > 'Settings' > 'Control Panel' > 'Control Center' > 'Information' > 'OS Version' | ||
| + | ===ActiveSync=== | ||
| + | The H15 can use Microsoft ActiveSync (for Windows XP) or Windows Mobile Device Center 9for Vista and 7) to sync data and transfer files between the H15 and a Windows PC. Two connection methods exist. | ||
| + | ====USB==== | ||
| + | To connect the H15 to a PC for ActiveSync via USB simply install the H15 into its cradle and connect the cradle both to supplied external power adapter and to the PC via the supplied USB cable. If ActiveSync (or WMDC) does not automatically connect to the H15 select 'Start' > 'Programs' > 'ActiveSync' to create the link. | ||
| + | ====Bluetooth==== | ||
| + | Connecting to a PC over an ActiveSync (or WMDC) connection over Bluetooth is a two part process. Part one includes configuring the H15 to use Bluetooth ActiveSync instead of USB. Part two involved pairing the H15 to the host PC via Bluetooth. | ||
| + | =====Configure ActiveSync===== | ||
| + | * Navigate to: 'Start' > 'Settings' > 'PC Connection' | ||
| + | * Check the box that says 'Enable direct connections to the desktop computer' | ||
| + | * Click the 'Change Connection' button. | ||
| + | * Choose 'Bluetooth' from the drop-down menu and click 'OK' | ||
| + | * Tap 'OK' | ||
| + | * Tap 'X' | ||
| + | =====Bluetooth Pairing===== | ||
| + | * Make sure the host PC is discoverable and allows incoming connections in your Bluetooth settings. | ||
| + | * On the H15 navigate to: 'Start' > 'Settings' > 'Control Panel' > 'Bluetooth Device Properties' | ||
| + | * Check the box 'Enable Bluetooth Device' and wait for the popup message 'Enable Bluetooth Successful!!'. Tap 'OK' | ||
| + | * Click 'Scan Device Service' | ||
| + | * Click 'Scan Device'. It may take a minute or two for your PC's devices to show up. Note that it is likely for each PC in range to appear across multiple lines as they support multiple types of connections. | ||
| + | * Double-Tap the icon that appears to be two blue arrows rotating inside a circle. | ||
| + | * On the popup window that appears click 'Trusted'. | ||
| + | * Select 'Yes' when prompted if you need to authenticate the device. | ||
| + | * Enter a default PIN code of '0000'. | ||
| + | * You should be prompted on the PC for a device attempting a connection. You will also be prompted for the PIN code you entered previously. Be sure these match. | ||
| + | * Once you see success messages on the host PC please click 'OK' then 'OK' then 'X' buttons to return to the desktop on the H15. | ||
| + | =====Final Steps===== | ||
| + | * Navigate to: 'Start' > 'Programs' > 'ActiveSync' | ||
| + | * If this part of the process gives an error message you may need to follow these steps: | ||
| + | ** Navigate to: 'Start' > 'Settings' > 'Control Panel' > 'Bluetooth Device Properties' | ||
| + | ** Click 'Scan Device Service' | ||
| + | ** Double Click your previously setup connection (it should already appear here) | ||
| + | ** Click 'Active' from the popup window. Tap 'OK' then 'OK' then 'X' to return to the Desktop. | ||
| + | ** Attempt the ActiveSync connection again. | ||
| ==Upgrading== | ==Upgrading== | ||