Version Differences for FAI5500
|
(→Restore Default Settings)
|
(→Restore Default Settings)
|
| Line 8: | |||
| ===Restore Default Settings=== | ===Restore Default Settings=== | ||
| There are two methods: | There are two methods: | ||
| - | * 1) Hold the MODE button AND the Trigger button down while you power up the scanner. Keep holding until you see all LEDS flashing, then release. The unit will continue for some time to reboot, but it will be set to the original factory defaults. Any past configurations that were saved in memory will still be there to recall. | + | * 1) Hold the <u>MODE button</u> AND the <u>Trigger button</u> down while you power up the scanner. Keep holding until you see all LEDS flashing, then release. The unit will continue for some time to reboot, but it will be set to the original factory defaults. Any past configurations that were saved in memory will still be there to recall. |
| * 2) Open the CONSOLE web page. Click on the Options GEAR icon in the upper-right corner. Select "Restore Factory Defaults". | * 2) Open the CONSOLE web page. Click on the Options GEAR icon in the upper-right corner. Select "Restore Factory Defaults". | ||