Version Differences for Composite Codes

Line 1:
- Bar Code, Select Type: GS1 Composite      
       
- GS1 Composite (formerly called UCC/EAN-128) uses the same code set as Code 128/GS1-128, except it does not allow function codes FNC2 through FNC4. FNC1 can be sent to the printer as the data string <SUB><SUB>1.      
       
- Syntax      
       
- c21[,m1][,m2][,m3][,m4][,m5][,m6]      
       
- Parameters      
       
- m1      
       
- Sets the symbology version:      
       
- m1 Version      
- 0 UCC/EAN-128 with CC-C (default)      
- 1 UCC/EAN-128 with CC-A or CC-B      
- 2 EAN-13 with CC-A or CC-B      
- 3 EAN-8 with CC-A or CC-B      
- 4 UPC-A with CC-A or CC-B      
- 5 UPC-E with CC-A or CC-B      
- 6 GS1 Composite with CC-A or CC-B      
- 7 GS1 Composite Truncated with CC-A or CC-B      
- 8 GS1 Composite Stacked with CC-A or CC-B      
- 9 GS1 Composite Stacked Omnidirectional with CC-A or CC-B      
- 10 GS1 DataBar Limited with CC-A or CC-B      
- 11 GS1 DataBar Expanded with CC-A or CC-B      
- 12 GS1 DataBar Expanded Stacked with CC-A or CC-B      
-      
       
- The printer determines whether CC-A or CC-B will be used based on the amount of data sent to the 2D Composite Component.      
       
- m2      
       
- Height of the separator pattern row. Valid only when m1 is set to 0 or from 6 to 12.      
       
- If the value for m2 is set too low, the height is changed to the smallest allowed value for the selected magnification.      
       
- If the value for m2 is set too high, an "invalid bar code data" error occurs.      
       
- Range: Between 1 time and 2 times the value set by Width of Line, Box, Bar, or Character Define. For example, if the width is set to 3, the range for m2 is 3 to 6.      
       
- Default: 1      
       
- m3      
       
- Number of columns per row (or the number of segments per row if m1 = 12).      
       
- Setting m1 and m3 to 0 selects the largest number of columns for the 2D bar code to fit within the 1D bar code (including its quiet zones).      
       
- Range: 1 to 30      
       
- Default: 0 if m1 = 0, or 4 if m1 = 12      
       
- m4      
       
- Enables display of space and parentheses ("(," ")") characters:      
       
- m4 Description      
- 0 Bar code does not include space or parentheses characters in the data, but displays these characters in the human readable interpretive field.      
- 1 Bar code and human readable interpretive field include the space and parentheses characters.      
-      
       
- m5      
       
- Height of each row in the 2D bar code.      
       
- Default: 0 (height is 3 times the magnification value).      
       
- m6      
       
- Enables printing of the human readable interpretive field:      
       
- m6 Description      
- 0 Human readable interpretive field is not printed      
- 1 Human readable interpretive field is printed      
-      
       
- The human readable interpretive field for the 2D Composite Component is displayed if Interpretive Field, Enable or Disable is set to 1.      
       
- Notes      
       
  The GS1 Composite symbology consists of an GS-128 linear component associated with an adjacent 2D Composite Component.    The GS1 Composite symbology consists of an GS-128 linear component associated with an adjacent 2D Composite Component. 
       
Line 103:
  Linear Component 2D Composite Component    Linear Component 2D Composite Component 
  Maximum Data Length    Maximum Data Length 
       
  Bar Code Type Data Length CC-A CC-B CC-C    Bar Code Type Data Length CC-A CC-B CC-C 
  GS-128 1-48 digits 56 digits    GS-128 1-48 digits 56 digits 
Line 133:
  196 char Not available    196 char Not available 
  Data lengths with an asterisk (*) indicate that the actual maximum amount of data depends on data content.    Data lengths with an asterisk (*) indicate that the actual maximum amount of data depends on data content. 
       
- See Also      
       
- ISO 646 Subset Characters      
       
- IPL Command Reference Manual, P/N