Version Differences for CRD3301
|
(→DIP SWITCHES)
|
(→Default Settings)
|
| Line 30: | |||
| ==Default Settings== | ==Default Settings== | ||
| To Default, unplug (Power OFF), Set DIP SWITCH #5 to ON, Plug power in (power ON), then flip dip-switch 5 to OFF. | To Default, unplug (Power OFF), Set DIP SWITCH #5 to ON, Plug power in (power ON), then flip dip-switch 5 to OFF. | ||
| - | Will set to: | + | Will then set to: |
| *9600 Baud - 8 Data bits, No Parity - 1 stop bit | *9600 Baud - 8 Data bits, No Parity - 1 stop bit | ||
| *ACK/NAK Response: None | *ACK/NAK Response: None | ||