Version Differences for CRD3301
|
(→About)
|
(→DIP SWITCHES)
|
| Line 27: | |||
| Software can be changed using the RS - 232C interface. | Software can be changed using the RS - 232C interface. | ||
| * All DIP-SWITCHES are read at power-on. If any are changed, the unit must power-cycle. | * All DIP-SWITCHES are read at power-on. If any are changed, the unit must power-cycle. | ||
| + | ==Default Settings== | ||
| + | To Default, unplug (Power OFF), Set DIP SWITCH #5 to ON, Plug power in (power ON), then flip dip-switch 5 to OFF. | ||
| + | Will set to: | ||
| + | *9600 Baud - 8 Data bits, No Parity - 1 stop bit | ||
| + | *ACK/NAK Response: None | ||
| + | *CTS Timeout: Infinite | ||