Version Differences for CRD3301

(→DIP SWITCHES)
(→DIP SWITCHES)
Line 7:
  Setting of DIPSW    Setting of DIPSW 
  The following functions can be set with DIPSW on the bottom of this unit.    The following functions can be set with DIPSW on the bottom of this unit. 
- **DIPSW 1: Always be sure to turn OFF.   + *DIPSW 1: Always be sure to turn OFF.  
  It is for future function expansion.    It is for future function expansion. 
- DIPSW 2: No security, inquiry scan enabled.   + *DIPSW 2: No security, inquiry scan enabled.  
  You will be able to connect without authentication.    You will be able to connect without authentication. 
- DIPSW 3: Invalidate the connection protocol.   + *DIPSW 3: Invalidate the connection protocol.  
  It will be able to connect with Bluetooth devices other than OPR - 3101.    It will be able to connect with Bluetooth devices other than OPR - 3101. 
- DIPSW 4: Disables detection of the DTR signal of the host.   + *DIPSW 4: Disables detection of the DTR signal of the host.  
  Set when there is no DTR signal on the host side equipment.    Set when there is no DTR signal on the host side equipment. 
- DIPSW 5: Set to the initial state (shipping setting).   + *DIPSW 5: Set to the initial state (shipping setting).  
  The contents of FLASH are returned to the initial state.    The contents of FLASH are returned to the initial state. 
- DIPSW 6: Please use it normally OFF.   + *DIPSW 6: Please use it normally OFF.  
  In the ON state, software rewrite mode is set.    In the ON state, software rewrite mode is set. 
  Software can be changed using the RS - 232C interface.    Software can be changed using the RS - 232C interface.